Skip to content
Boise Remodeling Co carpenter completing inspection repairs in a Treasure Valley home before closing
For agents, buyers and sellers

RE-10 repairs completed correctly and on schedule

We complete inspection-related repairs for Boise-area real estate transactions, with one point of contact, clear scheduling against your closing date, and documentation you can put straight in the file.

Boise Remodeling Co completes RE-10 and home inspection repairs for real estate agents, buyers and sellers across Boise and the Treasure Valley. Send the RE-10 and inspection report, and we review the repair list, price it, coordinate access, complete the approved work, and provide photo documentation and invoices for the file.

What is an RE-10? An RE-10 is the Idaho inspection response form. After a home inspection, the buyer uses it to ask the seller to repair specific items before closing, and the seller responds by agreeing, declining, or negotiating. The repairs on that form are what has to be scheduled, completed and documented before the transaction can close.

  1. Upload
  2. /Confirm repairs
  3. /Your details
  4. /Your range

Upload your RE-10 and get an instant estimate

Send the RE-10, the relevant inspection report pages, and any photos. We read the repair list, show you what we found, and you correct it before anything is priced.

Add your RE-10PDFs, photos or scans. A phone photo of a printed form works.

No contact details needed yet. You will see the repairs we found first.

Why this is different work

An inspection repair is not a remodel

A remodel has one client and a flexible date. An RE-10 has a contractual deadline, two sides who have already argued about the price, an inspection report behind every line, an occupant whose home it still is, and a closing that does not move because a contractor was slow.

That is a coordination problem as much as a construction one. We treat it that way: we ask for the deadline and the closing date before we quote, we confirm access in writing, we tell you the same day if something behind a wall changes the scope, and we document what was done so nobody has to take anyone's word for it.

Why agents use us

What you actually get out of handing this over

One contact for the whole repair list

Carpentry, drywall, paint, flooring, minor plumbing and electrical, and exterior work coordinated by one company. You stop chasing four contractors for one inspection response.

You are told before we proceed

If we open a wall and find something worse, you hear it that day, with photos, and nothing additional gets done until someone with authority approves it.

Documentation your file can use

Before-and-after photos, itemized invoices and receipts, sent in a form you can forward to the other agent, the lender or your client without editing it first.

Access handled professionally

Vacant, occupied, lockbox or tenant-occupied. We confirm the arrangement in writing beforehand and we do not turn up unannounced at your client's home.

Scheduling built around your dates

We ask for the repair deadline and the closing date first, because those decide whether a scope is realistic. If it is not, you hear that early enough to renegotiate.

A repair partner across transactions

Most of our RE-10 work comes from agents who used us once. Pre-listing repairs, buyer-requested repairs, seller preparation and post-closing work all run the same way.

What we repair

The repairs that actually appear on an inspection response

Interior repairs

  • Drywall repair, texture matching and repainting
  • Trim, molding and baseboard repair
  • Interior door adjustment, replacement and hardware
  • Cabinet repair, hinges, slides and pulls
  • Flooring and tile repair, carpet patching and restretching
  • Handrail, stair tread and guard repairs
  • Shelving, closet and general carpentry

Minor plumbing and electrical

  • Faucet, supply valve and toilet repairs
  • Leak repair at traps, supplies and fixtures
  • Outlet, switch and cover plate replacement
  • GFCI protection where an inspector has called for it
  • Light fixture replacement and smoke or CO detectors
  • Water heater replacement, permitted where required

Exterior and weatherproofing

  • Siding and exterior trim repair
  • Caulking, sealing and weatherproofing
  • Deck board and deck railing repair
  • Fence and gate repair
  • Gutter and downspout repair
  • Window seal and flashing repair
  • Minor localized roof repairs

What we coordinate rather than perform

These need a licensed specialist or an engineer. We will tell you so up front and, where we can, point you to the right trade rather than leave you to find one.

  • Structural repairs and anything needing an engineer's letter
  • Foundation work
  • Mold, asbestos or lead abatement, which requires testing and a licensed abatement contractor
  • Main electrical service, panel and meter work
  • Sewer and septic
  • HVAC equipment replacement
  • Gas line work
  • Full roof replacement
One company, whole list

Stop calling four contractors for one repair list

A typical inspection response spans drywall, paint, a door, a leaking supply valve, a GFCI outlet and some exterior caulking. Hiring that out separately means four schedules, four minimum charges, four sets of paperwork and four chances for one of them to miss your date.

We review the whole list at once, group the work so travel and set-up are shared across it, and give you a single scope, a single schedule and a single invoice. It is usually cheaper than the alternative, and it is always less work for you.

What one point of contact means in practice

  • One scope covering every trade on the list
  • One schedule built around your repair deadline
  • One person to call when something changes
  • One invoice and one documentation package
  • Shared travel and set-up instead of per-trade minimums
How it works

From repair list to signed-off file

  1. 01

    Send the RE-10

    Upload the RE-10, the relevant inspection report pages and any photos, with the property address, repair deadline and closing date.

  2. 02

    We review the repair list

    We work through every requested item and tell you which we can price from the documents, which need a photo, and which need someone on site.

  3. 03

    You get scope and pricing

    A written scope with pricing, the assumptions behind it, what is excluded, and anything we think will not survive contact with the property.

  4. 04

    We coordinate access

    We agree the access arrangement with whoever holds it, and schedule against your repair deadline and material lead times.

  5. 05

    We complete the approved work

    Approved repairs only. Anything we find that changes the scope is raised with photos and waits for approval before it is touched.

  6. 06

    You get the documentation

    Completion photos, itemized invoices and receipts, ready to share with the other side, the lender or your client.

Built around your dates

We ask for the deadline first

Inspection repairs sit inside a chain of dates: the inspection response deadline, the re-inspection, the final walkthrough, the appraisal and the closing itself. A repair finished the day after the walkthrough is not finished as far as the transaction is concerned.

So we prioritize transaction-related repairs, and we will tell you clearly what can reasonably be completed inside your timeframe. What we will not do is promise a date we have not checked against material lead times and property access. Send the documents as early as you can, even if the repair list is not final.

Any figure we give before an onsite visit is a planning range, not a contract price. Final pricing follows a scope confirmation, verified measurements, and review of any concealed or additional damage. No work is scheduled or authorized until a scope and agreement are approved.

Communication

You should never have to chase us for an update

Communication is the thing agents actually complain about, more than price and more than quality. It is the part we treat as deliverable work rather than courtesy.

  • A named point of contact from the first email
  • Written confirmation of scheduling and access
  • Status updates as the work progresses
  • Immediate notice of material delays
  • Same-day notice of unexpected property conditions
  • Written approval before any additional work
  • Completion photos, invoices and receipts
Before the inspection

Pre-listing repairs and seller preparation

Handling the likely inspection items before a property is listed usually costs less than negotiating them afterwards, and it removes the leverage a repair list gives a buyer. We do the same work ahead of a listing that we do in response to one.

  • Pre-listing repairs and inspection preparation
  • Deferred maintenance and safety corrections
  • Repairing visibly damaged areas
  • Minor cosmetic improvements
  • Addressing likely buyer objections early
  • Preparing a property for photography and showings
Common questions

What agents ask before sending us the first one

Service area

Across Ada and Canyon County

Boise Remodeling Co provides RE-10 and home inspection repair services for real estate agents, buyers and sellers in Boise, Meridian, Eagle, Nampa, Kuna, Star, Middleton, Garden City and Caldwell. We are based in Meridian, ID and work across the Treasure Valley.

More on how we work: our services, areas we serve, about the company and what clients say. Planning a larger project instead? Use the remodel estimator.

Send it over

Submit your RE-10 for review

The sooner we see the repair list, the sooner we can tell you what it involves, what it is likely to cost, and whether it fits your closing date. Send the RE-10, the inspection report and any photos.

Boise Remodeling Co · Meridian, ID · Treasure Valley · Ada and Canyon County